English Version Spanish Version
TOOL/PRODUCTION QUOTE
All of the information below is NOT required for a quote. If you have specific details on your requirements, the additional information improves the accuracy of your quote.
Contact Information:
 
* Denotes required fields
 
First & Last Name : *    
Company Name : *    
Title :       Email : *
Phone : *      FAX :
Address 1 : * County : *
Address 2 : Post Code : *
City : *        
Product Cycle: Mold Class:
10,000 50,000 250,000 1,000,000
Other: 		SPI 101    SPI 102 SPI 103 SPI 104
Prototype Unit Die               Other:
Product Information:
ATTACH FILE HERE:
please include all your parts in a single zip file.		     
Upon form submission, your file will be sent to our secure ftp site. If your file is very large you will need to wait until the transfer process is complete. If you experience problems please send your file to quotes@xpdg.com
Required Delivery Date:     Part No.
Plastic Material:
Shrinkage Factor:
Required Engineering: Process:
Product Drawings Thermoplastic Injection
Full Engineered Drawings Thermoplastic Injection Compression
Layout Drawings Thermoset Compression
3D Cad Files Sheet metal Die
  Die Cast Tool
Other: Thermoset Transfer
  Other:
Method Of Fill: Ejection:
Valve Gated Hot Sprue Direct Sprue Hot Sprue
Modified Insulated Runner Edge Gated Sub Gated
Insulated Runner   Cold Runner Hot Runner
Valve Gated Hot Runner Parting Line Injection
Other:
Stripper Rings
Standard Knock Out Pins
Threaded Knock Out Thread Size Thread Pattern
Guided Ejection Spring Return   Stripper Plate
Double Knock Out Stationary Side Ejection Lifter Bar
Hydraulic Ejection Spring Loaded Floating Plate
Ejector Blades Air Valves Sleeve Pins
Accelerated Ejection Positive Ejector Returns
Other:
Side Actions Activated By:
Ange Pin Ejector Pin Cam Air Cylinder Hydraulic Cylinder        Other:
Mold Materials:  
Mold Base:
Cavity Inserts:
 Heat Treated
Core Inserts:
Heat Treated
Special Inserts:
Heat Treated
Plating:
Mold Finish:
Cores:
Cavites:
Texturing
Special Engraving:
 Raised on part Sunk into part
EDM Finish (RMS):
Other:
Venting:
Parting Line Core Pins Sintered Pins Ejectors Runner            Other:
Mold Temperature Control: Special Features:
Heated Cartridge Heaters
Thermocouples   Drilled Lines
Quick Disconnect Counterbored Thread Size
Baffles Bubbler Tubes
Cooling Side Actions    Core Pins
Cooled Sprue Bushing Thermal Pins
Other:
Taper Parting Line Locks Bars Cones
Straight Side Locks Between A and B Plates
X Type Side Locks Between A and B Plates and Stripper
Date Code Inserts Recycling Inserts Mold Base Plating
Cycle Counter Bronze Plated Bushings
Self-Lubricating Bushings Replaceable Wear Plates
Other:
Spare Parts:
Cavities QTY   Core QTY
Inserts QTY   Core Pins QTY
Ejector Pins QTY   Ejector Sleeves QTY
Ejector Blades QTY   Other: QTY
   
Press Data: For Export Tools Only
Make: Shot Size:
Tie Bar Spacing: Platen Size:
Maximum Opening:    
Maximum Mould Size: LxWxH Number of Cavities
Mold to be tested by: XPDG Moulder    
Number of Sample Parts:    
Plastic material supplied by: XPDG Moulder    
       
Instructions:
 
 
© Copyright 2007 All Rights Reserved. All trademarks are properties of their respective owners.